1.75TBi upgrade!

We made good hybrid K03/K04 for my AR159 with 1.75TBi engine.

Billet aluminium compressor wheel. Very nice config ;)!
We will try get 300+ with remap.

http://www.forum.alfaholicy.org/imag...016/02/420.jpg



http://www.forum.alfaholicy.org/imag...016/02/421.jpg

This is 1,75 with stock turbo;
Załącznik 191432
with your upgrade should be more than 300PS ;-)

Giulietta QV? Nice. I also have similar peak around 4k RPM, I thought that is something unusual but now I am little bit calmer :)

You sure? May be in Giulietta QV?
Stock turbo from 159 veeeery small for 300hp.
240-250hp possible...

Its magic?

What about M32 gearbox with +300 HP engine?

I am not sure but only first series had m32, rest was based on c635

Cytat:

---

Napisał szymonjot

What about M32 gearbox with +300 HP engine?

---

Good question

- - - Updated - - -

Cytat:

---

Napisał oleksy00

I am not sure but only first series had m32, rest was based on c635

---

You taking about 159 or Giulietta

Cytat:

---

Napisał oleksy00

I am not sure but only first series had m32, rest was based on c635

---

Every 159 with TBi engine has m32 gearbox.

Cytat:

---

Napisał acab

You sure? May be in Giulietta QV?

---

Cytat:

---

Napisał acab

Stock turbo from 159 veeeery small for 300hp.
240-250hp possible...

Its magic?

---

Isn't any magic....
This is Alfa Romeo Giulietta QV 235HP man. My2013
Stock: 235HP/340Nm
Measured: 250HP/340Nm
Mod: 290HP/450Nm

See the difference. 159 TBi is combined with M32 (torque >440 will kill that gearbox immediately) and smaller turbocharger. Maybe different injectors also?
@acab you need to swap gearbox first :P Depends on desired torque of course.