Valve clearance (versions 1.9 JTD 8v)

[Darek68]

Hello.
I have a question about checking valve clearance in the engineAh ośmiozaworowych 1.9 JTD. After purchasing my AR 147 I replaced complete valve timing along with filters and oilem Mobil S 10W/40 ASO. I would like to know if I need to adjust the valve clearances after 95 thousand. HP klekocze a little but is smooth and punchy. On Alpha told me that these engines may regulations. If this is true and if you answer the question?
Yours sincerely-Darryl of Wielkopolska.

---

› Więcej...: Valve clearance (versions 1.9 JTD 8v)

[prymie]

From what I know, 8v and 10v does not have control hydraulic valves.

[sedici]

so, is the recommended what 100tys km and you could already do this

[Kolek1980]

Valve for your car is 0.30 suction and exhaust 0.35
Easy do it yourself because I rather only narrowed simply sanded tiles

[kamko25]

Easy do it yourself because I rather only narrowed simply sanded tiles

Valve always increases rather than reduces. If you now insert for example. 3.0 is certainly the next will be greater for example 3.15. I personally do not recommend grinding at home on my knee grinder, because tiles are very hard and it's hard to get it, we can find tidily and come into play hundredths of a millimetre.

JTD 8V and 10V JTD have regulations on the tiles
Better quickly change service

----------Post added at 20:24----------the previous post was written at 20:23----------

so, is the recommended what 100tys km and you could already do this

Buddy in JTD adjustment is recommended every 60 000 km

[sedici]

different sources variously give, however, Fiat's blue book recommends that you control what 40tys km

[prymie]

Heh, funny thing in this story is that a colleague Darek68 wanted to adjust the slack in the ASOand they usually performed incredibly extensive knowledge of the ... Wave. Cool, that is the forum, from which sometimes I learned more than in the service. I greet all and happy

[kaz156]

If you want to know more about the valve clearance in 1.9JTD visit the last page forum Alpha-Lancia.pl

[Kolek1980]

Tiles do not grinds on the knee only on magnesówce and it is very cheap and luz always only reduces as nothing no one "muddle along on.
This is a very cheap operation, where I drive wages after 1 zl from tiles

[J.A.N]

The connection to the topic asking because my knowledge in this field is zero, I have driven some 140K km I have no idea when and if in General were governed by clearances on the valves.
Carbide manifest themselves and if i can somehow same check? And how could the the event the cost of theyou ?